Icom IC-R9500 Instruction Manual - Page 185
Updating The Firmware
View all Icom IC-R9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
15 UPDATING THE FIRMWARE !3 After firmware loading is completed, the receiver starts the update automatically and the dialog at left is displayed. RWARNING!: NEVER turn the IC-R9500 power OFF at this stage. The receiver firmware will be damaged. !4 When the dialog disappears, the precaution as at left is displayed. !5 Read the precaution carefully, and then push [F-6•OK]. • Return to CF/USB-Memory set menu. !6 Push [POWER] to turn the IC-R9500 power OFF, then ON again. Please wait for 20sec. WARNING! NEVER turn power OFF. RX-DSP UPDATING... Please wait for 45sec. WARNING! NEVER turn power OFF. !7 Depending on the status of the update process, either of dialogs at left will appears in sequence. RWARNING!: NEVER turn the IC-R9500 power OFF at this stage. The receiver firmware will be corrupted. !8 After the dialog disappears, the firmware update is completed and the normal operation screen appears. 15-5