Icom IC-R9500 Instruction Manual - Page 106

8 SCANS ■ Scan set mode [F-1•Y] [F-2•Z] [F-4•DEF] [EXIT/SET] Main dial This set mode is used to set the skip scan setting, memory clear condition for auto memory write channels and appearing scan screen setting. q Push [F-5•SCAN] to select scan screen. w Push [F-7•SET] to select scan set mode. e Push [F-1•Y] or [F-2•Z] to select the desired item. r Rotate the main dial to select the desired condition. • Push and hold [F-4•DEF] for 1 sec. to select the default setting. t Push [EXIT/SET] to return to scan menu. SKIP Function Select the skip scan function ON or OFF. ON • ON : Scan skips the programmed memory channel in the skip memory bank while scanning (default) • OFF : Skip function OFF Auto MW SCAN Memory Clear Set the clearing condition for the auto memory write scan's memories channels. [AUTO] Long Push • ON : Auto memory channels are cleared when starting the auto memory write scan. • [AUTO] Long Push : Auto memory channels are cleared when pushing and holding [AUTO]. (default) • OFF : Auto memory channels must be cleared manually and auto memory write scan stops when 100 channels (A00 to A99) are wrote. Auto SCAN Screen (SCAN Start) Set the automatic scan screen ON function when starting a scan. ON • ON : When starting a scan, scan screen appears automatically. (default) • OFF : Scan screen does not appear until [F5•SCAN] is pushed. 8-4