Netgear R7300DST User Manual - Page 142
Disable the DHCP Server Feature in the DST Router, ADVANCED > Setup > LAN Setup
View all Netgear R7300DST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Nighthawk DST AC1900 DST Router and DST Adpater Model R7300DST 4. Select ADVANCED > Setup > LAN Setup. 5. Make sure that the Use Router as DHCP Server check box is selected. 6. Specify the range of IP addresses that the DST router assigns: a. In the Starting IP Address field, type the lowest number in the range. This IP address must be in the same subnet as the DST router. b. In the Ending IP Address field, type the number at the end of the range of IP addresses. This IP address must be in the same subnet as the DST router. 7. Click the Apply button. Your settings are saved. The DST router delivers the following parameters to any LAN device that requests DHCP: • An IP address from the range that you define • Subnet mask • Gateway IP address (the DST router's LAN IP address) • DNS server IP address (the DST router's LAN IP address) Disable the DHCP Server Feature in the DST Router By default, the DST router acts as a DHCP server. The DST router assigns IP, DNS server, and default gateway addresses to all computers connected to the LAN. The assigned default gateway address is the LAN address of the DST router. You can use another device on your network as the DHCP server, or specify the network settings of all your computers. To disable the DHCP server feature in the DST router: 1. Launch a web browser from a computer or WiFi device that is connected to the network. Specify Network Settings for the DST Router 142