Netgear R7300DST User Manual - Page 50
Requirements for Entering IPv6 Addresses, Use Auto Detect for an IPv6 Internet Connection
![]() |
View all Netgear R7300DST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Nighthawk DST AC1900 DST Router and DST Adpater Model R7300DST The IPv6 page displays. 5. In the Internet Connection Type menu, select the IPv6 connection type: • If your ISP did not provide details, select IPv6 Tunnel. • If you are not sure, select Auto Detect so that the DST router detects the IPv6 type that is in use. • If your Internet connection does not use PPPoE, DHCP or is not fixed, but is IPv6, select Auto Config. Your Internet service provider (ISP) can provide this information. For more information about IPv6 Internet connection, see the following sections: - Use Auto Detect for an IPv6 Internet Connection on page 50 - Use Auto Config for an IPV6 Internet Connection on page 52 - Set Up an IPv6 6rd Tunnel Internet Connection on page 53 - Set Up an IPv6 6to4 Tunnel Internet Connection on page 55 - Set Up an IPv6 Pass Through Internet Connection on page 57 - Set Up an IPv6 Fixed Internet Connection on page 57 - Set Up an IPv6 DHCP Internet Connection on page 59 - Set Up an IPv6 PPPoE Internet Connection on page 60 6. Click the Apply button. Your settings are saved. Requirements for Entering IPv6 Addresses IPv6 addresses are denoted by eight groups of hexadecimal quartets that are separated by colons. You can reduce any four-digit group of zeros within an IPv6 address to a single zero or omit it. The following errors invalidate an IPv6 address: • More than eight groups of hexadecimal quartets • More than four hexadecimal characters in a quartet • More than two colons in a row Use Auto Detect for an IPv6 Internet Connection To set up an IPv6 Internet connection through auto detection: 1. Launch a web browser from a computer or WiFi device that is connected to the network. 2. Enter http://www.routerlogin.net. A login window displays. 3. Enter the DST router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. Specify Your Internet Settings 50
![](/manual_guide/products/netgear-r7300dst-user-manual-6e082ce/50.png)