Netgear R7300DST User Manual - Page 52
Use Auto Config for an IPV6 Internet Connection, admin, password
View all Netgear R7300DST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Nighthawk DST AC1900 DST Router and DST Adpater Model R7300DST Use Auto Config for an IPV6 Internet Connection To set up an IPv6 Internet connection through auto configuration: 1. Launch a web browser from a computer or WiFi device that is connected to the network. 2. Enter http://www.routerlogin.net. A login window displays. 3. Enter the DST router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Advanced Setup > IPv6. The IPv6 page displays. 5. In the Internet Connection Type menu, select Auto Config. The DST router automatically detects the information in the following fields: • Router's IPv6 Address on WAN. This field shows the IPv6 address that is acquired for the DST router's WAN (or Internet) interface. The number after the slash (/) is the length of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no address is acquired, the field displays Not Available. • Router's IPv6 Address on LAN. This field shows the IPv6 address that is acquired for the DST router's LAN interface. The number after the slash (/) is the length of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no address is acquired, the field displays Not Available. 6. Select an IPv6 Domain Name Server (DNS) Address radio button: Specify Your Internet Settings 52