Netgear R7300DST User Manual - Page 240
Port Triggering, Add Service, Service Name, Service User, Single address, TCP/UDP, Triggering Port
View all Netgear R7300DST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 240 highlights
Nighthawk DST AC1900 DST Router and DST Adpater Model R7300DST 5. Select the Port Triggering radio button. 6. Click the Add Service button. 7. In the Service Name field, enter the name of the custom service or application. 8. In the Service User menu, select Any, or select Single address and enter the IP address of one computer: • Any. The is the default settings and allows any computer on the Internet to use this service. • Single address. Restricts the service to a particular computer. Enter the IP address in the field that becomes available with this selection from the menu. 9. Select the service type, either TCP or UDP or TCP/UDP (both). If you are not sure, select TCP/UDP. 10. In the Triggering Port field, enter the number of the outbound traffic port that will open the inbound ports. 11. Enter the inbound connection port information in the Connection Type, Starting Port, and Ending Port fields. 12. Click the Apply button. The service is now in the Portmap table. You must enable port triggering before the DST router used port triggering for the service that you added. See Enable Port Triggering on page 241. Manage Port Forwarding and Port Triggering 240