Netgear R7300DST User Manual - Page 65
Add VLAN Tag Groups, ADVANCED > Advanced Setup > VLAN/IPTV Setup, Enable VLAN / Bridge group
View all Netgear R7300DST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Nighthawk DST AC1900 DST Router and DST Adpater Model R7300DST The BASIC Home page displays. 4. Select ADVANCED > Advanced Setup > VLAN/IPTV Setup. The VLAN/IPTV Setup page displays: 5. Select the Enable VLAN / Bridge group check box. 6. Select the By bridge group radio button. 7. Select a Wired Ports check box or a Wireless check box: • If your device is connected to an Ethernet port on the DST router, select a Wired Ports check box that corresponds to the Ethernet port on the DST router to which the device is connected. • If your device is connected to your DST router's WiFi network, select a Wireless check box that corresponds to the DST router's WiFi network to which the device is connected. Note: You must select at least one Wired Ports or Wireless check box. You can select more than one check box. 8. Click the Apply button. Your settings are saved. Add VLAN Tag Groups You can add VLAN tag groups to the bridge and assign VLAN IDs and priority values to each VLAN tag group. If you add a VLAN tag group to the bridge, packets sent between the device and the DST router's Internet port are not processed through the router's network address translation (NAT) or firewall. To add a VLAN tag group: 1. Launch a web browser from a computer or WiFi device that is connected to the network. Specify Your Internet Settings 65