Netgear R7300DST User Manual - Page 199
admin, password, ADVANCED > Advanced Setup > Remote Management, Turn Remote Management On,
View all Netgear R7300DST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
Nighthawk DST AC1900 DST Router and DST Adpater Model R7300DST 2. Enter http://www.routerlogin.net. A login window displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Advanced Setup > Remote Management. 5. Select the Turn Remote Management On check box. 6. In the Allow Remote Access By section, specify the external IP addresses to be allowed to access the DST router's remote management: Note: For enhanced security, restrict access to as few external IP addresses as practical Select one of the following: • To allow access from a single IP address on the Internet, select the Only This Computer radio button. Enter the IP address to be allowed access. • To allow access from a range of IP addresses on the Internet, select the IP Address Range radio button. Enter a beginning and ending IP address to define the allowed range. • To allow access from any IP address on the Internet, select the Everyone radio button. 7. Specify the port number for accessing the DST router's web management interface. Normal web browser access uses the standard HTTP service port 80. For greater security, enter a custom port number for the remote web management interface. Choose a number from 1024 to 65535, but do not use the number of any common service port. The default is 8080, which is a common alternate for HTTP. 8. Click the Apply button. Your settings are saved. Manage Your DST Router Network 199