Netgear R7300DST User Manual - Page 248
Quick Tips, Sequence to Restart Your Network, Check Ethernet Cable Connections, WiFi Settings
View all Netgear R7300DST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 248 highlights
Nighthawk DST AC1900 DST Router and DST Adpater Model R7300DST b. Press the Geek Squad Setup and Support button on the DST router to allow the Agent temporary access to your DST router. The state of the Geek Squad Setup and Support LED indicates the status of the connection with the Geek Squad Agent: • Solid white. The DST router is connected to Geek Squad Support. • Blinking white. The connection is being established. • Off. Geek Squad Support is not connected. Quick Tips This section describes tips for troubleshooting some common problems. Sequence to Restart Your Network When you must restart your network, follow this sequence: 1. Turn off and unplug the modem. 2. Turn off the DST router. 3. Plug in the modem and turn it on. Wait two minutes. 4. Turn on the DST router and wait two minutes. Check Ethernet Cable Connections If your device does not power on, make sure that the Ethernet cables are securely plugged in. The Internet LED on the DST router is lit if the Ethernet cable connecting the DST router and the modem is plugged in securely and the modem and DST router are turned on. If one or more powered-on computers are connected to the DST router by an Ethernet cable, the corresponding numbered DST router Ethernet port LED lights. WiFi Settings Make sure that the WiFi settings in the computer or WiFi device and DST router match exactly. The WiFi network name (SSID) and WiFi security settings of the DST router and computer or WiFi device must match exactly. If you set up an access list on the Advanced Wireless Settings page, you must add each computer or WiFi device's MAC address to the DST router's access list. DST Router Troubleshooting 248