Netgear R7300DST User Manual - Page 56
Use These DNS Servers
View all Netgear R7300DST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Nighthawk DST AC1900 DST Router and DST Adpater Model R7300DST 5. In the Internet Connection Type menu, select 6to4 Tunnel. The DST router automatically detects the information in the Router's IPv6 Address on LAN field. This field shows the IPv6 address that is acquired for the DST router's LAN interface. The number after the slash (/) is the length of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no address is acquired, the field displays Not Available. 6. Select a Remote 6to4 Relay DST Router radio button: • Auto. Your DST router uses any remote relay DST router that is available on the Internet. This is the default setting. • Static IP Address. Enter the static IPv4 address of the remote relay DST router. Your IPv6 ISP usually provides this address. 7. Select an IPv6 Domain Name Server (DNS) Address radio button: • Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers. Your ISP automatically assigns this address. • Use These DNS Servers. If you know that your ISP requires specific servers, select this option. Enter the IP address of your ISP's primary DNS server. If a secondary DNS server address is available, enter it also. 8. Select an IP Address Assignment radio button: • Use DHCP Server. The DST router assigns IPv6 addresses to the devices on your home network (the LAN) through a DHCP server.This method passes more information to LAN devices, but some IPv6 systems might not support the DHCv6 client function. • Auto Config. This is the default setting. 9. To specify the interface ID for the IPv6 address of the DST router's LAN interface, select the Use This Interface ID check box and enter the interface ID. If you do not specify an ID here, the DST router generates one automatically from its MAC address. Specify Your Internet Settings 56