D-Link DXS-3400 User Manual - Page 112
Layer 2 Features, FDB, Static FDB, Unicast Static FDB
View all D-Link DXS-3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide 5. Layer 2 Features FDB VLAN VLAN Tunnel STP ERPS (G.8032) Loopback Detection Link Aggregation MLAG Flex Links L2 Protocol Tunnel L2 Multicast Control LLDP FDB Static FDB Unicast Static FDB This window is used to display and configurethe static unicast forwarding settings on the Switch. To view the following window, click L2 Features>FDB>Static FDB>Unicast Static FDB, as shown below: Figure 5-1Unicast Static FDB Window The fields that can be configured are described below: Parameter Port/Drop Unit Port Number VID MAC Address Description Allows the selection of the port number on which the MAC address entered resides This option could also drop the MAC address from the unicast static FDB. When selecting Port, select the port number. Select the stacking unit ID of the Switch that will be configured here. After selecting the Port option, select the port number used here. Enter the VLAN ID on which the associated unicast MAC address resides. Enter the MAC address to which packets will be statically forwarded. This must be a unicast MAC address. Click the Apply button to accept the changes made. Click the Delete All button to delete all the entries found in the display table. Click the Delete button to delete the specified entry. 102