D-Link DXS-3400 User Manual - Page 225

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter Summary Description that have been written into the hardware chip. Select this option to display a summary and count of the route sources configured on this Switch. Click the Find button to locate a specific entry based on the information entered. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. Route Preference This window is used to display and configure the preference setting of the IPv4 default route and static route. The distance of the default route and the static route will be compared with other IPv4 routes learned by the dynamic routing protocol if they have the same destination network address. The lower distance value is preferred. To view the following window, click L3 Features> Route Preference, as shown below: Figure 6-26Route Preference Window The fields that can be configured are described below: Parameter Distance Default Distance Static Description Enter the administrative distance of default routes here. The range is from 1 to 255. By default, this value is 1. Enter the administrative distance of static default routes here.The range is from 1 to 255. By default, this value is 60. Click the Apply button to accept the changes made. IPv6 General Prefix This window is used to display and configure the VLAN interface's IPv6 general prefix settings. To view the following window, click L3 Features>IPv6 General Prefix, as shown below: Figure 6-27IPv6 General Prefix Window 215