D-Link DXS-3400 User Manual - Page 191
Multicast VLAN IPv6 State, Member Port Settings
View all D-Link DXS-3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter Multicast VLAN IPv6 State Ignore VLAN VID VLAN Name Description multicast VLAN, but does not match the associated profile, then the packet will be forwarded or dropped based on this setting. By default, the packet will be dropped. Select to enable or disable the IPv6 IGMP control packet process in multicast VLANs. Select the enable or disable the ignore VLAN feature here. This specifies the setting for tagged IGMP or MLD control packets. If enabled, then the packet's VLAN is ignored and taken to match the profile to find its multicast VLAN. When this option is enabled, the Switch will ignore the VLAN of the receiving IGMP or MLD control packet and try to find a match profile. Enter the VLAN ID of the multicast VLAN that will be created or deleted here. The range is 2 to 4094. Enter the VLAN name of the multicast VLAN that will be created or deleted here. Click the Apply button to accept the changes made. Click the Delete button to delete an entry based on the information entered. Click the Add button to add a new entry based on the information entered. The fields that can be configured in Member Port Settingsare described below: Parameter VID Action Role Description Enter the multicast VLAN's ID that will be used here. The range is 2 to 4094. Select Add to add a new entry based in the information entered. Select Delete to delete an entry based in the information entered. Select the role here. Options to choose from are Receiver and Source. • Receiver - Specifies to configure the port as a subscriber port that can only receive multicast data in the multicast VLAN. • Source - Specifies to configure the port as an uplink port that can send multicast data in the multicast VLAN. Type Select the type here. Options to choose from are Tagged and Untagged. • Tagged - Specifies that if a port is a tagged member, the packets sent from the port are tagged with the Multicast VLAN ID. • Untagged - Specifies that if the port is an untagged member, then the packets will be forwarded in the untagged form. Unit From Port ~ To Port Select the Switch's unit ID that will be used here. Select the Switch's port range that will be used here. Click the Apply button to accept the changes made. The fields that can be configured in Replace Priority Settingsare described below: Parameter VID Action IP Type Description Enter the multicast VLAN's ID that will be used here. The range is 2 to 4094. Select Add to add a new entry based in the information entered. Select Delete to delete an entry based in the information entered. Select the IP type here. Options to choose from are IPv4 and IPv6. • IPv4 - Specifies to the remap priority for IPv4 multicast packets forwarded on the multicast VLAN. • IPv6 - Specifies to the remap priority for IPv6 multicast packets forwarded on 181