D-Link DXS-3400 User Manual - Page 440

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter RCP Server IP User Name Source File Destination File Description Enter the RCP server's IP address here. Enter the user name used for the RCP connection here. This name can be up to 32 characters long. Enter the source filename and path of the firmware file located on the RCP server here. This field can be up to 64 characters long. Enter the destination path and location where the new firmware should be stored on the Switch. This field can be up to 64 characters long. Click the Upgrade button to initiate the firmware upgrade. Firmware Backup to HTTP This window is used to initiate a firmware backup to a local PC using HTTP. To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Backup to HTTP, as shown below: Figure 13-6Firmware Backup to HTTP Window The fields that can be configured are described below: Parameter Unit Source File Description Select the Switch unit that will be used for this configuration here. Enter the source filename and path of the firmware file located on the Switch here. This field can be up to 64 characters long. Click the Backup button to initiate the firmware backup. Firmware Backup to TFTP This window is used to initiate a firmware backup to a TFTP server. To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Backup to TFTP, as shown below: Figure 13-7Firmware Backup to TFTP Window The fields that can be configured are described below: 430