D-Link DXS-3400 User Manual - Page 442

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Firmware Backup to RCP This window is used to initiate a firmware backup to an RCP server. To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Backup to RCP, as shown below: Figure 13-9Firmware Backup to RCP Window The fields that can be configured are described below: Parameter Unit RCP Server IP User Name Source File Destination File Description Select the Switch unit that will be used for this configuration here. Enter the RCP server's IP address here. Enter the user name used for the RCP connection here. This name can be up to 32 characters long. Enter the source filename and path of the firmware file located on the Switch here. This field can be up to 64 characters long. Enter the destination filename and path of the firmware file to be backed up to the RCP server here. This field can be up to 64 characters long. Click the Backup button to initiate the firmware backup. Configuration Restore & Backup Configuration Restore from HTTP This window is used to initiate a configuration restore from a local PC using HTTP. To view the following window, click Tools > Configuration Restore & Backup > Configuration Restore from HTTP, as shown below: Figure 13-10Configuration Restore from HTTP Window The fields that can be configured are described below: Parameter Unit Source File Description Select the Switch unit that will be used for this configuration here. In this field the source configuration file's filename and path will be displayed after 432