D-Link DXS-3400 User Manual - Page 184
MLD Snooping Groups Settings
View all D-Link DXS-3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter Description Minimum Version Select the minimum version of MLD hosts that is allowed on the VLAN. Options to choose from are 1 and 2. Fast Leave Select this option to enable or disablethe MLD snooping fastleave function.If enabled, the membership is immediately removed when the system receive the MLDleave message. Report Suppression Select this option to enable or disable the report suppression. Suppression Time Enter the interval of suppressing duplicate MLDreports or leaves. The range is from 1 to 300. Proxy Reporting Select this option to enable or disablethe proxy-reporting function. Source Address Enter the source IP of proxy reporting. This is available when Enabled is selected in Proxy Reporting. Mrouter Port Learning Select this option to enable or disable Mrouter port learning. Querier State Select this option to enable or disable the querier state. Query Version Select the general query packet version sent by the MLDsnooping querier. Options to choose from are 1, and 2. Query Interval Enter the interval at which the MLDsnooping querier sends MLDgeneral query messages periodically. The range is from 1 to 31744. Max Response Time Enter the maximum response time, in seconds, advertised in MLDsnooping queries. The range is from 1 to 25. Robustness Value Enter the robustness variable used in MLD snooping. The range is from 1 to 7. Last Listener Query Interval Enter the interval at which the MLDsnooping querier sends MLDgroup-specific or group-source-specific (channel) query messages. The range is from 1 to 25. Rate Limit Enter the rate limit value here. The range is from 1 to 1000. Tick the No Limit option to apply no rate limit on this profile. Ignore Topology Change Select to enable or disable the ignore topology change feature here. Click the Apply button to accept the changes made. MLD Snooping Groups Settings This window is used to display and configure the MLD snooping static group, and view MLD snooping group. To view the following window, click L2 Features>L2 Multicast Control> MLD Snooping >MLD Snooping Groups Settings, as shown below: 174