D-Link DXS-3400 User Manual - Page 394
MEP State, CCM State, PDU Priority, Fault Alarm, MAC-Status, Remote-CCM, Error-CCM, XCON-CCM
View all D-Link DXS-3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 394 highlights
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Figure 10-7CFM Settings (Add MA, Add MEP, MEPID Detail, Edit) Window The fields that can be configured are described below: Parameter MEP State CCM State PDU Priority Fault Alarm Description Select to enable or disable the MEP's state on the interface here. Select to enable or disable the CCM feature's state here. Select the PDU priority value here. The range is from 0 to 7. This feature is used to define the 802.1p priority that is set in the CCM and the LTM messages transmitted by the MEP. Select the type of defects whose fault alarms can be sent by this MEP. Options to choose from are None, All, MAC-Status, Remote-CCM, Error-CCM, and XCONCCM. • None - Specifies that no fault alarm will be sent. • All - Specifies that the fault alarms for all types of defects can be sent. • MAC-Status - Specifies that the fault alarms for the defects whose priority is equal to or higher than the DefMACstatus can be sent. • Remote-CCM - Specifies that the fault alarms for the defects whose priority is equal to or higher than the DefRemoteCCM can be sent. • Error-CCM - Specifies that the fault alarms for the defects whose priority is equal to or higher than the DefErrorCCM can be sent. • XCON-CCM - Specifies that only the fault alarm of the DefXconCCM can be 384