D-Link DXS-3400 User Manual - Page 143
L2 Features>VLAN Tunnel>Dot1q Tunnel, Inner TPID, From Port ~ To Port, Apply
View all D-Link DXS-3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Only configure the 802.1Q tunneling Ethernet type on ports that are connected to the provider bridge network, which receives and transmits the service VLAN tagged frames. If the tunnel Ethernet type is configured, the specified value will be the TPID in the outer VLAN tag of the transmitted frames out of this port. The specified TPID is also used to identify the service VLAN tag for the received frame on this port. To view the following window, click L2 Features>VLAN Tunnel>Dot1q Tunnel, as shown below: Figure 5-45Dot1q Tunnel Settings Window The fields that can be configured are described below: Parameter Inner TPID Unit From Port ~ To Port Outer TPID Description Enter the inner TPID value here. This value is in the hexadecimal form. The range is from 0x1 to 0xFFFF.The inner TPID is used to decide if the ingress packet is Ctagged. The Inner TPID is per system configurable. Select the Switch's unit ID that will be used here. Select the Switch's port range that will be used here. Enter the outer TPID value here. This value is in the hexadecimal form. The range is from 0x1 to 0xFFFF. Click the Apply button to accept the changes made. After clicking the Dot1q Tunnel Port Settings tab, the following page will appear. 133