D-Link DXS-3400 User Manual - Page 131
GVRP Advertise VLAN, L2 Features>VLAN> GVRP > GVRP Advertise VLAN
View all D-Link DXS-3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Unit From Port ~ To Port GVRP Status Join Time Leave Time Leave All Time Description Select the Switch unit that will be used for this configuration here. Select the range of ports that will be used for this configuration here. Select the enable or disable the GVRP port status. This enables the port to dynamically become a member of a VLAN. By default, this option is disabled. Enter the Join Time value in centiseconds. This value must be between 10 and 10000 centiseconds. By default, this value is 20 centiseconds. Enter the Leave Time value in centiseconds. This value must be between 10 and 10000 centiseconds. By default, this value is 60 centiseconds. Enter the Leave All Time value in centiseconds. This value must be between 10 and 10000 centiseconds. By default, this value is 1000 centiseconds. Click the Apply button to accept the changes made. GVRP Advertise VLAN This window is used to display and configure the GVRP advertised VLAN settings. To view the following window, click L2 Features>VLAN> GVRP > GVRP Advertise VLAN, as shown below: Figure 5-29GVRP Advertise VLANWindow The fields that can be configured are described below: Parameter Unit From Port ~ To Port Action Advertise VID List Description Select the Switch unit that will be used for this configuration here. Select the range of ports that will be used for this configuration here. Select the advertised VLAN to port mapping action that will be taken here. Options to choose from are All, Add, Remove, and Replace. When selecting All, all the advertised VLANs will be used. Enter the advertised VLAN ID list here. Click the Apply button to accept the changes made. 121