D-Link DXS-3400 User Manual - Page 156

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide To view the following window, click L2 Features>STP> STP Instance, as shown below: Figure 5-56STP Instance Window The fields that can be configured are described below: Parameter Instance Priority Description After clicking the Edit button, enter the instance priority value here. This specifies that the bridge priority and bridge MAC address together forms the Spanning-Tree Bridge-ID, which is an important factor in the SpanningTree topology. The range is from 0 to 61440. Click the Edit button to re-configure the specific entry. Click the Apply button to accept the changes made. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. MSTP Port Information This window is used to display and configure the MSTP port information settings. To view the following window, click L2 Features>STP> MSTP Port Information, as shown below: Figure 5-57MSTP Port Information Window The fields that can be configured are described below: Parameter Unit Port Cost Priority Description Select the Switch unit that will be used for this display here. Select the port number that will be cleared here. After clicking the Edit button, enter the cost value here. This value must be between 1 and 200000000. After clicking the Edit button, select the priority value here. Options to choose from are 0 to 240. By default this option is 0. A lower value has higher priority. 146