D-Link DXS-3400 User Manual - Page 405
Ethernet OAM Configuration Settings, Apply, Ethernet OAM Table, From Port ~ To Port, Show All
View all D-Link DXS-3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 405 highlights
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter Description • Stop - Specifies to request the peer to change to the normal operation mode. If the remote peer is configured to ignore the remote loopback request, then the remote peer will not enter or exit the remote loopback mode upon receiving the request. To start the remote peer to enter the remote loopback mode, administrators must ensure that the local client is in the active mode and the OAM connection is established. If the local client is already in the remote loopback mode, then this feature cannot be applied. Click the Apply button to accept the changes made. The fields that can be configured in Ethernet OAM Tableare described below: Parameter Unit From Port ~ To Port Description Select the Switch's unit ID that will be used here. Select the Switch's port range that will be used here. Click the Find button to locate a specific entry based on the information entered. Click the Show All button to display all the entries. Ethernet OAM Configuration Settings This window is used to display and configure the Ethernet OAM feature's configuration settings. To view the following window, click OAM >Ethernet OAM>Ethernet OAM Configuration Settings, as shown below: 395