D-Link DXS-3400 User Manual - Page 333
IPv4 RADIUS Source Interface Type, Source Interface Type
View all D-Link DXS-3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 333 highlights
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter Group Server Name IP Address IPv6 Address Description Enter the RADIUS group server's name here. This name can be up to 32 characters long. Enter the group server's IPv4 address here. Enter the group server's IPv6 address here. Click the Add button to add a new entry based on the information entered. Click the ShowDetail button to view and configure more detailed settings for the RADIUS group server. Click the Delete button to remove the specified entry. After clicking the ShowDetail button, the following page will be available. Figure 9-32RADIUS Group Server Settings (Detail) Window The fields that can be configured are described below: Parameter IPv4 RADIUS Source Interface State IPv4 RADIUS Source Interface Type VID IPv6 RADIUS Source Interface State IPv6 RADIUS Source Interface Type VID Description Select to enable or disable IPv4 RADIUS source interface. Select the IPv4 RADIUS source interface type. Options to choose from are Loopback and VLAN. Enter the VLAN ID used here. When Loopback is selected in IPv4 RADIUS Source Interface Type, this value must be between 1 and 8. When VLAN is selected in IPv4 RADIUS Source Interface Type, this value must be between 1 and 4094. Select to enable or disable IPv6 RADIUS source interface. Select the IPv6 RADIUS source interface type. Options to choose from are Loopback and VLAN. Enter the VLAN ID used here. When Loopback is selected in IPv6 RADIUS Source Interface Type, this value must be between 1 and 8. When VLAN is selected in IPv4 RADIUS Source Interface Type, this value must be between 1 and 4094. Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. Click the Back button to return to the previous window. 323