D-Link DXS-3400 User Manual - Page 398

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter MAC Address Period PDU Priority Description Enter the MAC address for the LM test here. Select the time period here. This specifies the transmitting interval of the LM PDU. Options to choose from are 100ms, 1sec, and 10sec. Select the PDU priority value here. The range is from 0 to 7. This specifies the 802.1p priority to be set in the LMM messages transmitted by the MEP. The default value is the PDU priority of the MEP. Click the Apply button to accept the changes made. The fields that can be configured in Clear CFM LMare described below: Parameter Type Description Select the type of information to clear here. Options to choose from are: • Result - Specifies to clear the stored LM results. • Statistics - Specifies to clear the stored statistics of ETH-LM frames (LMM and LMR). Click the Clear button to clear the CFM LM statistics information based on the selection made. Click the Clear All button to clear all the CFM LM statistics information. Click the Back button to return to the previous window. CFM Port Settings This window is used to display and configure the CFM feature's port settings. To view the following window, click OAM > CFM >CFM Port Settings, as shown below: Figure 10-12CFM Port Settings Window The fields that can be configured are described below: Parameter Unit From Port ~ To Port State Description Select the Switch's unit ID that will be used here. Select the Switch's port range that will be used here. Select the enable or disable the CFM feature on the specified port(s) here. Click the Apply button to accept the changes made. Click the Show Detail button to more detailed information about the CFM settings on the specified port. 388