D-Link DXS-3400 User Manual - Page 347
IP Source Guard Binding, Security > IMPB > IPv4 >IP Source Guard>IP Source Guard Binding
View all D-Link DXS-3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 347 highlights
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter Unit From Port ~ To Port State Validation Description Select the Switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Select to enable or disable the IP source guard's state for the specified port(s) here. Select the validation method used here. Options to choose from are IP and IPMAC. Selecting IP means that the IP address of the received packets will be checked. Selecting IP-MAC means that the IP address and the MAC address of the received packets will be checked. Click the Apply button to accept the changes made. IP Source Guard Binding This window is used to display and configure the IP source guard binding settings. To view the following window, click Security > IMPB > IPv4 >IP Source Guard>IP Source Guard Binding, as shown below: Figure 9-52IP Source Guard Binding Window The fields that can be configured in IP Source Binding Settingsare described below: Parameter MAC Address VID IP Address Unit From Port ~ To Port Description Enter the MAC address of the binding entry here. Enter the VLAN ID of the binding entry here. Enter the IP address of the binding entry here. Select the Switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Click the Apply button to accept the changes made. The fields that can be configured in IP Source Binding Entryare described below: 337