D-Link DXS-3400 User Manual - Page 216

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter Description configure an IPv6 address on the interface using the EUI-64 interface ID. Select the Link Local option to configure a link-local address for the IPv6 interface. Click the Apply button to accept the changes made. The fields that can be configured for NS Interval Settingsare described below: Parameter NS Interval Description Enter the Neighbor Solicitation (NS) interval value here. The range is from 0 to 3600000 milliseconds, in multiples of 1000. If the specified time is 0, the router will use 1 second on the interface and advertise 0 (unspecified) in the RA message. Click the Apply button to accept the changes made. The fields that can be configured for ND Settingsare described below: Parameter Hop Limit Reachable Time Managed Config Flag Other Config Flag RA Min Interval RA Max Interval RA Lifetime RA Suppress Description Enter the hop limit value here. The range is from 0 to 255.The IPv6 packet originated at the system will also use this value as the initial hop limit. Enter the reachable time here. The range is from 0 to 3600000 milliseconds.If the specified time is 0, the router will use 1200 seconds on the interface and advertise 1200 (unspecified) in the RA message. The reachable time is used by the IPv6 node in determining the reachability of the neighbor nodes. Turn the managed config flag option On or Off here.When the neighbor host receives the RA which has flag turned on, the host should use a stateful configuration protocol to obtain IPv6 addresses. Turn the other config flag option On or Off here.By setting the other configuration flag on, the router instructs the connected hosts to use a stateful configuration protocol to obtain auto-configuration information other than the IPv6 address. Enter the minimum RA interval time value here. The range is from 3 to 1350 seconds.This value must be smaller than 0.75 times the maximum value. Enter the maximum RA interval time value here. The range is from 4 to 1800 seconds. Enter the RA lifetime value here. The range is from 0 to 9000 seconds.The lifetime value in RA instructs the received host the lifetime value for taking the router as the default router. Select to enable or disable the RA suppress feature here. Click the Apply button to accept the changes made. After selecting the Interface IPv6 Address tab option, at the top of the page, the following page will be available. Figure 6-12IPv6 Interface (Detail, Interface IPv6 Address) Window Click the Delete button to delete the specified entry. After selecting the Neighbor Discover tab option, at the top of the page, the following page will be available. 206