D-Link DXS-3400 User Manual - Page 49

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter Description require the user to enter a password or a key. • SHA - Specify that the HMAC-SHA authentication protocol will be used. This field will require the user to enter a password or a key. Key Priv-Protocol by Key Enter the authentication protocol key here. For MD5 this key must be 32 characters long. For SHA this key must be 40 characters long. When selecting v3 in the SNMP Version drop-down list, and selecting Key in the SNMP V3 Encryption drop-down list, this option is available. Select the private protocol. Options to choose from are the following: • None - Specify that no authorization protocol is in use. • DES56 - Specify that DES 56-bit encryption is in use, based on the CBCDES (DES-56) standard. This field will require the user to enter a password or a key. Key IP Access-List Name Enter the private protocol key here. For none, this field will be disabled. For DES56 this key must be 32 characters long. Enter the standard IP access control list (ACL) to associate with the user. Click the Add button to add a new entry based on the information entered. Click the Delete button to remove the specified entry. SNMP Host Table Settings This window is used to display and configure the recipient of the SNMP notification. To view the following window, click Management>SNMP >SNMP Host Table Settings, as shown below: Figure 4-15SNMP Host Table Settings Window The fields that can be configured are described below: Parameter Host IPv6 Address Host IPv6 Address User-based Security Model Description Enter the IPv4 address of the SNMP notification host. Enter the IPv6 address of the SNMP notification host. Select the security model here. Options to choose from are SNMPv1, SNMPv2c, and SNMPv3. • SNMPv1- Select to allow the group user to use the SNMPv1 security model. • SNMPv2c-Select to allow the group user to use the SNMPv2c security 39