D-Link DXS-3400 User Manual - Page 18
From Port ~ To Port, Medium Type, State, Flow Control, Normal, Parameter, Description
View all D-Link DXS-3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Figure 3-4Port Settings Window The fields that can be configured are described below: Parameter Unit From Port ~ To Port Medium Type State Flow Control Medium Type MDIX Description Select the stacking unit ID of the Switch that will be configured here. Select the appropriate port range used for the configuration here. Select the port medium type here. Options to choose from are Auto, RJ45 and SFP. Note: Selecting the SFP option, includes the use of SFP+ transceivers for 10G connectivity. Select this option to enable or disabled the physical port here. Select to either turn flow control On or Off here. Ports configured for full-duplex use 802.3x flow control, half-duplex ports use back-pressure flow control, and Auto ports use an automatic selection of the two. Select the port medium type here. Options to choose from are RJ45 and SFP. Note: Selecting the SFP option, includes the use of SFP+ transceivers for 10G connectivity. Select the Medium Dependent Interface Crossover (MDIX) option here. Options to choose from are Auto, Normal, and Cross. • Auto - Select this option for auto-sensing of the optimal type of cabling. • Normal - Select this option for normal cabling. If this option is selected, the port is in the MDIX mode and can be connected to a PC's NIC using a straight-through cable or a port (in the MDI mode) on another switch through 8