D-Link DXS-3400 User Manual - Page 217

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Figure 6-13IPv6 Interface (Detail, Neighbor Discover) Window After selecting the DHCPv6 Client tab option, at the top of the page, the following page will be available. Figure 6-14IPv6 Interface (Detail, DHCPv6 Client) Window Click the Restart button to restart the DHCPv6 client service. The fields that can be configured for DHCPv6 Client Settingsare described below: Parameter Client State Description Select to enable or disable the DHCPv6 client service here. Select the Rapid Commit option to proceed with two-message exchange for address delegation. The rapid-commit option will be filled in the Solicit message to request two messages handshake. Click the Apply button to accept the changes made. The fields that can be configured for DHCPv6 Client PD Settingsare described below: Parameter Client PD State General Prefix Name IPv6 DHCP Client PD Hint Description Select to enable or disable the DHCPv6 client process to request the prefix delegation through a specified interface. Select the Rapid Commit option to proceed with two-message exchange for prefix delegation. The rapid-commit option will be filled in the Solicit message to request two messages handshake. Enter the IPv6 general prefix name here. This name can be up to 12 characters long. Enter the IPv6 prefix to be sent in the message as a hint here. Click the Apply button to accept the changes made. Loopback Interface This window is used to display and configure the loopback interface settings. A loopback interface is a software only interface which always stays in the up status. To view the following window, click L3 Features>Interface > Loopback Interface, as shown below: 207