D-Link DXS-3400 User Manual - Page 200

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter Action Address Description are Default, IPv4 and IPv6. Select this option to enable or disable the action field Enter the IP address that will be sent. Click the Apply button to accept the changes made. NOTE:The IPv4 or IPv6 address entered here should be an existing LLDP management IP address. LLDP Management Address List This window is used to display the LLDP management address list. To view the following window, click L2 Features>LLDP>LLDP Management Address List, as shown below: Figure 5-101LLDP Management Address List Window The fields that can be configured are described below: Parameter Subtype Description Select the subtype. Options to choose from are All, IPv4 and IPv6. After selecting the IPv4 option, enter the IPv4 address in the space provided. After selecting the IPv6 option, enter the IPv6 address in the space provided. Click the Findbutton to locate a specific entry based on the selection made. LLDP Basic TLVs Settings Type-length-value (TLV) allows the specific sending information as a TLV element within LLDP packets. This window is used to enable the settings for the Basic TLVs Settings. An active LLDP port on the Switch always included mandatory data in its outbound advertisements. There are four optional data types that can be configured for an individual port or group of ports to exclude one or more of these data types from outbound LLDP advertisements. The mandatory data type includes four basic types of information (end of LLDPDU TLV, chassis ID TLV, port ID TLV, and Time to Live TLV). The mandatory data types cannot be disabled. There are also four data types which can be optionally selected. These include Port Description, System Name, System Description and System Capability. To view the following window, click L2 Features>LLDP>LLDP Basic TLVs Settings, as shown below: 190