D-Link DXS-3400 User Manual - Page 57
DHCP Class Settings, Service IPv6 DHCP State, Apply, Management>DHCP >DHCP Class Settings
View all D-Link DXS-3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter Service IPv6 DHCP State Description Select this option to enable or disable the IPv6 DHCP relay and server service. Click the Apply button to accept the changes made. DHCP Class Settings This window is used to display and configure the DHCP class and the DHCP option matching pattern for the DCHP class. To view the following window, click Management>DHCP >DHCP Class Settings, as shown below: Figure 4-27DHCP Class Settings Window The fields that can be configured are described below: Parameter Class Name Description Enter the DHCP class name with a maximum of 32 characters. Click the Apply button to accept the changes made. Click the Edit button to modify the DHCP option matching pattern for the corresponding DCHP class. Click the Delete button to remove the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. After clicking the Edit button, the following window will appear. Figure 4-28DHCP Class Settings (Edit) Window The fields that can be configured are described below: Parameter Option Hex Description Enter the DHCP option number. The range is from 1 to 255. Enter the hex pattern of the specified DHCP option. Tick the * check box not to 47