D-Link DXS-3400 User Manual - Page 48
User Name, Group Name, SNMP Version, SNMP V3 Encryption, Password, Auth-Protocol by Password, DES56
View all D-Link DXS-3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Figure 4-14SNMP User Table Settings Window The fields that can be configured are described below: Parameter User Name Group Name SNMP Version SNMP V3 Encryption Auth-Protocol by Password Description Enter an alphanumeric string of up to 32 characters. This is used to identify the SNMP users. Enter the SNMP group name to which the user belongs. The syntax is general string that does not allow spaces. Select the SNMP version. Options to choose from are v1, v2c, and v3. When selecting v3 in the SNMP Version drop-down list, this option is available. Options to choose from are None, Password, and Key. When selecting v3 in the SNMP Version drop-down list, and selecting Password in the SNMP V3 Encryption drop-down list, this option is available. Select the authentication level. Options to choose from are the following: • MD5 - Select to use the HMAC-MD5-96 authentication level. This field will require the user to enter a password or a key. • SHA - Specify that the HMAC-SHA authentication protocol will be used. This field will require the user to enter a password or a key. Password Priv-Protocol by Password Enter the authentication protocol password here. For MD5 this password must be between 8 and 16 characters long. For SHA this password must be between 8 and 20 characters long. When selecting v3 in the SNMP Version drop-down list, and selecting Password in the SNMP V3 Encryption drop-down list, this option is available. Select the private protocol. Options to choose from are the following: • None - Specify that no authorization protocol is in use. • DES56 - Specify that DES 56-bit encryption is in use, based on the CBCDES (DES-56) standard. This field will require the user to enter a password or a key. Password Auth-Protocol by Key Enter the private protocol password here. For none, this field will be disabled. For DES56 this password must be between 8 and 16 characters long. When selecting v3 in the SNMP Version drop-down list, and selecting Key in the SNMP V3 Encryption drop-down list, this option is available. Select the authentication level. Options to choose from are the following: • MD5 - Select to use the HMAC-MD5-96 authentication level. This field will 38