D-Link DXS-3400 User Manual - Page 44

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide To view the following window, click Management>SNMP >SNMP Linkchange Trap Settings, as shown below: Figure 4-9SNMP Linkchange Trap Settings Window The fields that can be configured are described below: Parameter Unit From Port ~ To Port Trap Sending Trap State Description Select the Switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Select this option to enable or disable the sending of the SNMP notification traps that is generated by the system. Select this option to enable or disable the SNMP link change trap. Click the Apply button to accept the changes made. SNMP View Table Settings This window is used to assign views to community strings that define which MIB objects can be accessed by a remote SNMP manager. The SNMP Group created with this table maps SNMP users (identified in the SNMP User Table) to the views created in the previous window. To view the following window, click Management>SNMP >SNMP View Table Settings, as shown below: Figure 4-10SNMP View Table Settings Window 34