D-Link DXS-3400 User Manual - Page 254
Aggregate Policer, Apply, Match, Delete, Specify, ACL Name, CoS List, Inner, DSCP List, IPv4 only
View all D-Link DXS-3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 254 highlights
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Click the Apply button to accept the changes made. Click the Match button to configure the specific entry. Click the Deletebutton to remove the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. After clicking the Match button, the following page will be available. Figure 7-13Class Map (Match) Window The fields that can be configured are described below: Parameter None Specify ACL Name CoS List DSCP List Precedence List Protocol Name VLAN List Description Select this option to match nothing to this class map. Select the option to match something to this class map. Select and enter the access list name that will be matched with this class map here. This name can be up to 32 characters long. Select and enter the CoS list value that will be matched with this class map here. This value must be between 0 and 7. Tick the Inner option to match the inner most CoS of QinQ packets on a Layer 2 class of service (CoS) marking. Select and enter the DSCP list value that will be matched with this class map here. This value must be between 0 and 63.Tick the IPv4 only option to match IPv4 packets only. If not specified, the match is for both IPv4 and IPv6 packets. Select and enter the precedence list value that will be matched with this class map here. This value must be between 0 and 7. Tick the IPv6 only option to match IPv6 packets only. If not specified, the match is for both IPv4 and IPv6 packets. For IPv6 packets, the precedence is most three significant bits of traffic class of IPv6 header. Select the protocol name that will be matched with the class map here. Options to choose from are ARP, BGP, DHCP, DNS, EGP, FTP, IPv4, IPv6, NetBIOS, NFS, NTP, OSPF, PPPOE, RIP, RSTP, SSH, Telnet, and TFTP. Select and enter the VLAN list value that will be matched with the class map here. This value must be between 1 and 4094. Tick the Inner option to match the innermost VLAN ID in an 802.1Q double tagged frame. Click the Apply button to accept the changes made. Click the Back button to discard the changes made and return to the previous page. Aggregate Policer This window is used to display and configure the aggregate policer settings. 244