D-Link DXS-3400 User Manual - Page 277
iSCSI, iSCSI Settings
View all D-Link DXS-3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 277 highlights
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Figure 7-39QCN CPID Table Window The fields that can be configured are described below: Parameter QCN CPID Description Enter the Congestion Point Identifier (CPID) to get the corresponding interface ID and CP index. This ID is 16 hexadecimal digits long. Click the Find button to locate a specific entry based on the information entered. iSCSI iSCSI Settings This window is used to display and configure the Internet Small Computer Systems Interface (iSCSI) settings. To view the following window, click QoS> iSCSI > iSCSI Settings, as shown below: Figure 7-40iSCSI Settings Window The fields that can be configured are described below: Parameter iSCSI State iSCSI CoS Description Select to globally enable or disable the iSCSI awareness feature here. Select the iSCSI CoS that will be configured here. Options to choose from are: • VPT - Specifies to use VLAN Priority Tag (VPT) to assign iSCSI session packets. Enter the VPT value in the space provided. • DSCP - Specifies to use DSCP to assign iSCSI session packets. Enter the DSCP value in the space provided. • Default - Specifies to use the default settings. By default, the VPT is used with the value of 7. Select the Remark option to mark the iSCSI frames with the configured VPT or 267