D-Link DXS-3400 User Manual - Page 157

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Click the Clear Detected Protocol button to clear the detected protocol settings for the port selected. Click the Find button to locate a specific entry based on the information entered. Click the Edit button to re-configure the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. ERPS (G.8032) ERPS This window is used to display and configure Ethernet Ring Protection Switching (ERPS) settings. To view the following window, click L2 Features>ERPS (G.8032)> ERPS, as shown below: Figure 5-58ERPS Window The fields that can be configured in ERPS Version Settingsare described below: Parameter ERPS Version Description Select the ERPS version here. Options to choose from are G.8032v1 and G.8032v2. Before specifying G.8032v1 for a G.8032v2 device, changing the ERPS version will lead to the restart of the running protocol. Click the Apply button to accept the changes made. The fields that can be configured in Ethernet Ring G.8032are described below: Parameter Ring Name Description Enter the Ethernet Ring Protection (ERP) instance's name here. This name can be up to 32 characters long. Click the Apply button to create an ITU-T G.8032 ERP physical ring. Click the Edit Ring button to modify an ITU-T G.8032 ERP physical ring. Click the Show Detail button to view the ITU-T G.8032 ERP physical ring's status information. Click the Delete button to delete the specified ITU-T G.8032 ERP physical ring. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. 147