D-Link DXS-3400 User Manual - Page 215

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered. Click the Show Detail button to view and configure more detailed settings for the IPv6 interface entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. After clicking the Show Detail button, the following page will be available. Figure 6-11IPv6 Interface (Detail, IPv6 Interface Settings) Window The fields that can be configured are described below: Parameter IPv6 MTU IPv6 State Description Enter the IPv6 MTU value here. The range is from 1280 to 65534 bytes. By default, this value is 1500 bytes. This parameter is used to configure the MTU to be advertised in RA messages. Select to enable or disable the IPv6 interface's global state here. Click the Back button to discard the changes made and return to the previous page. Click the Apply button to accept the changes made. The fields that can be configured for IPv6 Address Autoconfigare described below: Parameter State Description Select to enable or disable the automatic configuration of the IPv6 address using the stateless auto-configuration feature here. Select the Default option to specify that if the default router is selected on this interface, a default route will be installed using that default router. This option can be specified only on one interface. Click the Apply button to accept the changes made. The fields that can be configured for Static IPv6 Address Settingsare described below: Parameter IPv6 Address Description Enter the IPv6 address for this IPv6 interface here. Select the EUI-64 option to 205