D-Link DXS-3400 User Manual - Page 343

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter Action IP Sender IP Sender IP Mask MAC Sender MAC Sender MAC Mask Description Select the action that will be taken here. Options to choose from are Permit and Deny. Select the type of sender IP address that will be used here. Options to choose from are Any, Host, and IP with Mask. After selecting the Host or IP with Mask options as the type of IP, enter the sender IP address used here. After selecting the IP with Mask option as the type of IP, enter the sender IP mask used here. Select the type of sender MAC address that will be used here. Options to choose from are Any, Host, and MAC with Mask. After selecting the Host or MAC with Mask options as the type of MAC, enter the sender MAC address used here. After selecting the MAC with Mask option as the type of MAC, enter the sender MAC mask used here. Click the Back button to return to the previous page. Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. ARP Inspection Settings This window is used to display and configure the ARP inspection settings. To view the following window, click Security > IMPB > IPv4 > Dynamic ARP Inspection >ARP Inspection Settings, as shown below: Figure 9-46ARP Inspection Settings Window The fields that can be configured in ARP Inspection Validationare described below: Parameter Src-MAC Description Select to enable or disable the source MAC option here.This option specifies to check for ARP requests and response packets and the consistency of the source MAC address in the Ethernet header against the sender MAC address in the ARP 333