D-Link DXS-3400 User Manual - Page 453

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Figure 13-25Reset Window Select one of the following options: • The Switch will reset to its factory default settings and then reboot. • The Switch will reset to its factory default settings and then reboot. This option excludes the IP address. • The Switch will reset to its factory default settings and not reboot. This option excludes the stacking information. Click the Apply button to initiate the reset. Reboot System This window is used to reboot the Switch and alternatively save the configuration before doing so. To view the following window, click Tools >Reboot System, as shown below: Figure 13-26Reboot System Window When rebooting the Switch, any configuration changes that was made during this session, will be lost unless the Yes option is selected when asked to save the settings. Click the Reboot button to alternatively save the settings and reboot the Switch. Figure 13-27Reboot System (Rebooting) Window DLMS Settings This window is used to display and configure the D-Link License Management System (DLMS) settings. The license specifies the feature options that are enabled on the Switch. License keys are sold in the market. It may be printed on a physical package or be displayed in an e-mail or a portal. The user needs to register the license key on the Global Registration Portal to get the activation code. Install the proper activation code rather than license key to activate/unlock some features. After the activation code was installed successfully, reboot the Switch to activate the license. 443