D-Link DXS-3400 User Manual - Page 63
DHCP Server Dynamic Binding, Pool Name, Hardware Address, Client Identifier, Apply, Delete
View all D-Link DXS-3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Figure 4-35DHCP Server Manual Binding Window The fields that can be configured are described below: Parameter Pool Name Host Mask Hardware Address Client Identifier Description Enter the DHCP server's pool name here. This name can be up to 32 characters long. Enter the DHCP host's IPv4 address here. Enter the DHCP host's network subnet mask here. Enter the DHCP host's MAC address here. Enter the DHCP host's identifier in hexadecimal notation here.The client identifier is formatted by the media type and the MAC address. Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. DHCP Server Dynamic Binding This window is used to display and clear the DHCP server's dynamic binding entries. To view the following window, click Management>DHCP > DHCP Server >DHCP Server Dynamic Binding, as shown below: Figure 4-36DHCP Server Dynamic Binding Window The fields that can be configured are described below: Parameter IP Address Pool Name Description Enter the binding entry's IPv4 address here. Enter the DHCP server's pool name here. This name can be up to 32 characters long. Select the All option to clear the binding entries for all pools. Click the Find button to locate a specific entry based on the information entered. 53