D-Link DXS-3400 User Manual - Page 332

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Figure 9-30RADIUS Server Settings Window The fields that can be configured are described below: Parameter IP Address IPv6 Address Authentication Port Accounting Port Retransmit Timeout Key Type Key Description Enter the RADIUS server's IPv4 address here. Enter the RADIUS server's IPv6 address here. Enter the authentication port number used here. This value must be between 0 and 65535. By default, this value is 1812. If no authentication is used, use the value 0. Enter the accounting port number used here. This value must be between 0 and 65535. By default, this value is 1813. If no accounting is used, use the value 0. Enter the retransmit value used here. This value must be between 0 and 20. By default, this value is 3. To disable this option, enter the value 0. Enter the timeout value used here. This value must be between 1 and 255 seconds. By default, this value is 5 seconds. Select the key type that will be used here. Options to choose from are Plain Text and Encrypted. Enter the key, used to communicate with the RADIUS server, here. This key can be up to 254 characters long. Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. RADIUS Group Server Settings This window is used to display and configure the RADIUS group server settings. To view the following window, click Security > RADIUS >RADIUS Group Server Settings, as shown below: Figure 9-31RADIUS Group Server Settings Window The fields that can be configured are described below: 322