D-Link DXS-3400 User Manual - Page 155

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Figure 5-55MST Configuration Identification Window The fields that can be configured for MST Configuration Identificationare described below: Parameter Configuration Name Revision Level Description Enter the MST.This name uniquely identifies the MSTI (Multiple Spanning Tree Instance). If a Configuration Name is not set, this field will show the MAC address to the device running MSTP. Enter the revision level value here. This value must be between 0 and 65535. By default, this value is 0. This value, along with the Configuration Name, identifies the MSTP region configured on the Switch. Click the Apply button to accept the changes made. In the Private VLAN Synchronize section, the user can click the Apply button to synchronize the private VLANs. The fields that can be configured for Instance ID Settingsare described below: Parameter Instance ID Action VID List Description Enter the instance ID here. This value must be between 1 and 64. Select the action that will be taken here. Options to choose from are Add VID and Remove VID. Enter the VID list value here. This field is used to specify the VID range from configured VLANs set on the Switch. Click the Apply button to accept the changes made. Click the Edit button to re-configure the specific entry. Click the Deletebutton to remove the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. STP Instance This window is used to display and configure the STP instance settings. 145