D-Link DXS-3400 User Manual - Page 386

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter Description exchange with RC4 40 bits for message encryption and MD5 for message digest. • RSA_WITH_RC4_128_MD5:Select to use RSA key exchange with RC4 128-bit encryption for message encryption and Message Digest 5 (MD5) for message digest. • RSA_WITH_AES_128_CBC_SHA:Select to use RSA key exchange with AES 128-bit encryption for message encryption and SHA for message digest. • RSA_WITH_AES_256_CBC_SHA:Select to use RSA key exchange with AES 256-bit encryption for message encryption and SHA for message digest. • RSA_WITH_AES_128_CBC_SHA256:Select to use RSA key exchange with AES 128-bit encryption for message encryption and SHA 256-bit for message digest. • RSA_WITH_AES_256_CBC_SHA256:Select to use RSA key exchange with AES 256-bit encryption for message encryption and SHA 256-bit for message digest. • DHE_DSS_WITH_AES_256_CBC_SHA:Select to use DH key exchange with AES 256-bit encryption and SHA for message digest. • DHE_RSA_WITH_AES_256_CBC_SHA:Select to use DH key exchange with AES 256-bit encryption and SHA for message digest. Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered. Click the Edit button to re-configure the specific entry. Click the Delete button to remove the specified entry. SFTP Server Settings This window is used to display and configure the Secure File Transfer Protocol (SFTP) server's settings. SFTP is a remotely secure file transfer protocol over a reliable data stream. Because SFTP itself does not provide authentication and security, the SFTP server runs as a sub-system of the SSH server. To view the following window, click Security >SFTP Server Settings, as shown below: Figure 9-98SFTP Server Settings Window The fields that can be configured are described below: Parameter SFTP Server Idle Timeout Description Select to globally enable or disable the SFTP server feature here. Enter the idle timeout value here. If the SFTP server detects no operation after the duration of the idle timer for a specific SFTP session, the Switch will close this SFTP session. The range is from 30 to 600 seconds. By default, this value is 120 seconds. Click the Apply button to accept the changes made. 376