D-Link DXS-3400 User Manual - Page 389

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter Domain Level Description easy identification of administrative responsibility for each maintenance domain. Enter the Maintenance Domain's (MD's) level here. The range is from 0 to 7. A unique MD level is assigned to define the hierarchical relationship between domains. The larger range of domain has the higher value of level. Click the Apply button to accept the changes made. Click the Edit button to modify the specified entry. Click the Delete button to delete the specified entry. Click the Add MA button to add a new Maintenance Association (MA) rule. After clicking the Edit button, the following page will appear. Figure 10-2CFM Settings (Edit) Window The fields that can be configured in the tableare described below: Parameter MIP Creation Description Select the Maintenance domain Intermediate Point (MIP) option here. The creation of MIPs on a maintenance domain is useful for tracing the link, MIP by MIP. It also allows the user to perform a loopback from an MEP to an MIP. An enumerated value indicates whether the management entity can create MIP Half Functions (MHF) for a maintenance domain. Options to choose from are None, Auto, and Explicit. • None - Specifies not to create the MIP for a maintenance domain. • Auto - Specifies that MIPs will be created on any port for the MAs in this maintenance domain,when there is no MEP configured on that port for the MAs with the same VID at this MD level or any higher active MD levels, and at the same time there is an MEP configured on that port for the MA with the same VID at the next lower active MD level or there is no MA with the same VID at any lower active MD levels.For an intermediate Switch in an MA, the setting must be Auto in order for the MIPs to be created on this device. • Explicit - Specifies that MIPs will be created on any port for the MAs in this maintenance domain, when there is no MEP configured on that port for the MAs with the same VID at this MD level or any higher active MD levels, and at the same time there is an MEP configured on that port for the MA with the same VID at the next lower active MD level. SenderID TLV This option is used to configure the default transmission of the sender ID TLV by MPs in anMD. Select one of the following options: • None - Specifies not to transmit the sender ID TLV. 379