D-Link DXS-3400 User Manual - Page 84
NTP Server Settings, Management>NTP >NTP Server Settings
View all D-Link DXS-3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide NTP Server Settings This window is used to display and configure the NTP server settings.This is used to enable the Switch to synchronize the time with an NTP server. To view the following window, click Management>NTP >NTP Server Settings, as shown below: Figure 4-64NTP Server Settings Window The fields that can be configured are described below: Parameter IP Address IPv6 Address Version Key ID Min Poll Max Poll Prefer Description Select and enter the IPv4 address of the NTP server here. Select and enter the IPv6 address of the NTP server here. Enter the NTP version number here. The range is from 1 to 4. Enter the authentication key ID here. The range is from 1 to 255. Enter the minimum poll value here. This specifies the minimum poll interval for NTP messages. This value is calculated as 2 to the power of the minimum poll interval value specified. For example, if the value specified here is 6, the minimum poll interval that will be used is 64 seconds (26=64). The range is from 3 to 16. Enter the maximum poll value here. This specifies the maximum poll interval for NTP messages. This value is calculated as 2 to the power of the maximum poll interval value specified. For example, if the value specified here is 6, the maximum poll interval that will be used is 64 seconds (26=64). The range is from 4 to 17. Select whether or not this entry will be the preferred server for synchronization. Options to choose from are True and False. Click the Apply button to accept the changes made. Click the Delete button to delete the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. NTP Peer Settings This window is used to display and configure the NTP peer settings. To view the following window, click Management>NTP >NTP Peer Settings, as shown below: 74