D-Link DXS-3400 User Manual - Page 168

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide After MLAG was enabled and the Switch was rebooted, the following page will appear. Figure 5-70MLAG Settings (Enabled) Window The fields that can be configured in MLAG Stateare described below: Parameter MLAG State Description Select to enable or disable the MLAG function here. Click the Apply button to accept the changes made. The fields that can be configured in MLAG Configurationare described below: Parameter Domain Device ID Hello Interval Description Enter the MLAG domain ID here. The range is from 1 to 255. Select the Default option to use the default value which is 1. Enter the MLAG device ID for the Switch here. The range is from 1 to 2. Select the Default option to use the default value which is 1. Enter the MLAG hello interval here. This is the time that will elapse between the transmission of MLAG hello messages. The range is from 1 to 10 seconds. Select the Default option to use the default value which is 3 seconds. Click the Apply button to accept the changes made. The fields that can be configured in MLAG Peer Link Settingsare described below: Parameter Port Peer Link Description Select the physical port number that will be used here. Select this option to configure the selected port as a peer-link port. Peer-links are used to create a connection between MLAG peer Switches. 158