D-Link DXS-3400 User Manual - Page 17
Port Configuration, Port Settings
View all D-Link DXS-3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Figure 3-3Peripheral Settings Window The fields that can be configured in Environment Trap Settingsare described below: Parameter Fan Trap Power Trap Temperature Trap Description Click to enable or disable the fan trap state for warning fan event (fan failed or fan recover). Click to enable or disable the power trap state for warning power event (power failed or power recover). Click to enable or disable the temperature trap state for warning temperature event (temperature exceeds the thresholds or temperature recover). Click the Apply button to accept the changes made. The fields that can be configured in Environment Temperature Threshold Settingsare described below: Parameter Unit Thermal High Threshold Low Threshold Description Select the Switch unit that will be used for this configuration here. Select the thermal sensor ID. Enter the high threshold value of the warning temperature setting. The range is from -100 to 200 Celsius degree. Tick the Default check box to return to the default value. Enter the low threshold value of the warning temperature setting. The range is from -100 to 200 Celsius degree. Tick the Default check box to return to the default value. Click the Apply button to accept the changes made. Port Configuration Port Settings This window is used to display and configure the Switch's port settings. NOTE:The 10M and 100M speed options are only applicable when connecting to the Management Port (Mgmt 0) is used. To view the following window, click System>Port Configuration>Port Settings, as shown below: 7