D-Link DXS-3400 User Manual - Page 268

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter WRED State Profile Weight ECN State Description Select to enable or disable the WRED feature state on the specified port(s) here. Enter the WRED profile's ID here. The range is from 1 to 128. Enter the exponential weight value here. The range is from 0 to 15. This feature is used to configure the WRED exponential weight factor for the average queue size calculation for the queue. Select to enable or disable the ECN feature on the specified port(s) here. Click the Apply button to accept the changes made. WRED Drop Counter This window is used to display and clear the WRED feature's drop counter information. To view the following window, click QoS> WRED > WRED Drop Counter, as shown below: Figure 7-28WRED Drop Counter Window The fields that can be configured are described below: Parameter Unit From Port ~ To Port Description Select the Switch's unit ID that will be used here. Select the Switch's port range that will be used here. Click the Clear button to clear the counter information based on the selections made. Click the Clear All button to clear the counter information associated with all entries. ETS ETS Port Settings This window is used to display and configure the Enhanced Transmission Selection (ETS) willing mode for the Data Center Bridging Exchange Protocol (DCBX) on the specified interface(s). To view the following window, click QoS> ETS > ETS Port Settings, as shown below: 258