D-Link DXS-3400 User Manual - Page 37

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide 4. Management Command Logging User Account Settings Password Encryption Password Recovery Login Method SNMP RMON Telnet/Web Session Timeout DHCP DHCP Auto Configuration DNS NTP IP Source Interface File System Stacking Virtual Stacking (SIM) D-Link Discovery Protocol SMTP Settings NLB FDB Settings Command Logging This window is used to display and configure enable or disable the command logging function.The command logging function is used to log the commands that have successfully been configured to the Switch via the command line interface. The requirement is to log the command itself, along with information about the user account that entered the command into the system log. Commands that do not cause a change in the Switch configuration or operation (such as show) will not be logged. To view the following window, click Management >Command Logging, as shown below: Figure 4-1Command Logging Window The fields that can be configured are described below: Parameter Command Logging State Description Select to enable or disable the command logging function here. Click the Apply button to accept the changes made. User Account Settings On this page, user accounts can be created and configured. Also on this page active user account sessions can be viewed. There are several configuration options available in the Web User Interface (Web UI). The set of configuration options available to the user depends on the account's Privilege Level. 27