D-Link DXS-3400 User Manual - Page 265
PFC Port Settings, From Port ~ To Port, Direction, Network QoS Policy Map, Apply
View all D-Link DXS-3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 265 highlights
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter Unit From Port ~ To Port Direction Network QoS Policy Map Name Description Select the Switch's unit ID that will be used here. Select the Switch's port range that will be used here. Specifies to apply the policy map for ingress flow on the interface. Enter the network QoS policy map's name here. This name can be up to 32 characters long. Select the None option to not associate this configuration with a network QoS policy map. Click the Apply button to accept the changes made. PFC Port Settings This window is used to display and configure the Priority-based Flow Control (PFC) port settings. To view the following window, click QoS> QoS PFC >PFC Port Settings, as shown below: Figure 7-25PFC Port Settings Window The fields that can be configured in PFC Port Settingsare described below: Parameter Unit From Port ~ To Port Willing Description Select the Switch's unit ID that will be used here. Select the Switch's port range that will be used here. Select to enable or disable the willing feature here. This is used to turn on the Data Center Bridging Exchange Protocol (DCBX) PFC willing feature which indicates that the specified local port(s) is/are willing to accept PFC configurations from a remote system. Click the Apply button to accept the changes made. The fields that can be configured in ClearPFC Countersare described below: Parameter Unit From Port ~ To Port Frame Type Description Select the Switch's unit ID that will be used here. Select the Switch's port range that will be used here. Select the All option to specify that all ports will be used here. Select the frame type that will be cleared here. Options to choose from are: 255