D-Link DXS-3400 User Manual - Page 443
Configuration Restore from TFTP
View all D-Link DXS-3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 443 highlights
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide Parameter Destination File Replace Description selection. To navigate to the location of the configuration file located on the local PC, either double click in the text box or click the Browse button. Enter the destination path and location where the configuration file should be stored on the Switch. This field can be up to 64 characters long. Select the running-config option to restore and overwrite the running configuration file on the Switch. Select the startup-config option to restore and overwrite the start-up configuration file on the Switch. Select this option to replace the configuration file on the Switch with this one. Click the Restore button to initiate the configuration restore. Configuration Restore from TFTP This window is used to initiate a configuration restore from a TFTP server. To view the following window, click Tools > Configuration Restore & Backup > Configuration Restore from TFTP, as shown below: Figure 13-11Configuration Restore from TFTP Window The fields that can be configured are described below: Parameter Unit TFTP Server IP Source File Destination File Replace Description Select the Switch unit that will be used for this configuration here. Enter the TFTP server's IP address here. When select the IPv4 option, enter the IPv4 address of the TFTP server in the space provided. When the IPv6 option is selected, enter the IPv6 address of the TFTP server in the space provided. Enter the source filename and path of the configuration file located on the TFTP server here. This field can be up to 64 characters long. Enter the destination path and location where the configuration file should be stored on the Switch. This field can be up to 64 characters long. Select the running-config option to restore and overwrite the running configuration file on the Switch. Select the startup-config option to restore and overwrite the start-up configuration file on the Switch. Select this option to replace the configuration file on the Switch with this one. Click the Restore button to initiate the configuration restore. Configuration Restore from FTP This window is used to initiate a configuration restore from an FTP server. To view the following window, click Tools > Configuration Restore & Backup > Configuration Restore from FTP, as shown below: 433